This page assumes that you are using a Windows computer, and that you have scenes downloaded with the funscript in the same folder, with the same base filename.

So you have received your device, now what?

Now you need to download the driver for the ESP32 controller. You can find an easily installable one here: https://www.pololu.com/docs/0J7/2 . You can also download the driver directly if you are familiar with installing drivers through device manager from here: https://www.silabs.com/software-and-tools/usb-to-uart-bridge-vcp-drivers?tab=downloads .

You will need a program to interface with the toy. I use MultiFunPlayer from here: https://github.com/Yoooi0/MultiFunPlayer/releases

By default, the program only enables the L0 axis, which is straight up and down. You will want to enable R1 and R2, and turn off the random move generation.